#1 Maintenance Software | Reactive & Preventative
AnunciReactive maintenance, preventive maintenance, and control of daily operations made easy. Maintenance software to make maintenance management & tasks simple. Save time & money.Work Order Management
Read Through the Information To Get An Overview Of Work Order Software.Global Procedure Library
Download Procedures to Improve Your Maintenance, Safety, and Operations
Preventive Maintenance Forms | Ready-to-Use Checklists
AnunciDigitize Any Process, Procedure Or Policy Easily. Get Started For Free With Our Checklists. Create With AI Or Customize One Of 100k Free Inspection Templates Available In Our Library
Every 6 months or 1,000 Hours of Operation
- Clean coolant tank of sludge and debris.
- Remove chucks and jaws for thorough cleaning.
- Replace Hydraulic fluid and filters.
- Drain and replace Lubricant fluids.
- Drain and replace Coolants.
- Check machine for leveling if needed.
- Review the manufacturer’s maintenance guidebook to ensure compliance.
- Contact local CNC machine dealer or service center for any repairs or upgrades.
billor.com/preventative-maintenance-checklist-for-cnc-machines/- La gent també pregunta
CNC Machine | Checklist for Preventive Maintenance - Okuma
Contact your local distributorto have the following preventive maintenance performed by a certified Okuma Engineer: 1. Have the coolant tank cleaned of sludge, chips, and oil 2. Have the chuck and jaws taken off the machine and cleaned 3. Have the hydraulic tank drained and replace the hydraulic oil … Mostra'n més
- 1. Check the hydraulic pressure to make sure it’s at 4.5 MPa
- 2. Check the hydraulic fluids to make sure they’re at the right operating level
- 3. Check to make sure the chuck pressure is at the right oper… Mostra'n més
- 1. Check and grease the chain on the chip conveyor
- 2. Check and clean the filters on the coolant tank Mostra'n més
Contact your local distributor and have the following inspected: 1. Have the headstock checked for taper 2. Have the spindle checked for radial and end play 3. Have the chuck cylinder checked for run out 4. Have the tailstock checked for taper 5. Have the turret … Mostra'n més
Explora més
HAAS CNC MACHINE TOOL PREVENTIVE MAINTENANCE CHECKLIST
LLOC WEBHAAS CNC MACHINE TOOL PREVENTIVE MAINTENANCE CHECKLIST. MECHANICAL SYSTEM. Verify machine level VMC – verify spindle sweep Lathe – verify turret square to spindle face Check lubrication is reaching the spindle Inspect drive belts Inspect tool holders/grease pull studs.
- Mida del fitxer: 80KB
- Nombre de pàgines: 1
#1 Maintenance Software | Reactive & Preventative
AnunciReactive maintenance, preventive maintenance, and control of daily operations made easy. Maintenance software to make maintenance management & tasks simple. Save time & money.Preventive Maintenance Forms | Ready-to-Use Checklists
AnunciDigitize Any Process, Procedure Or Policy Easily. Get Started For Free With Our Checklists. Create With AI Or Customize One Of 100k Free Inspection Templates Available In Our Library
- S'han suprimit alguns resultats
Salta al contingut
